Pouches & Holders

Heavy duty nylon manufactured by Niton For D Cell torches 50mm Belt Loop. Photos are of a Grade A holder CONDITION : Grade B - Items with more n...

Genuine equipment Molle ASP Tri-Fold Pouch Holder Designed to fit a modular molle vests Ambidextrous fit ASP Tri-Fold cuffs unit not included This...

Leather baton holder  Belt fastening Retracted baton holder size - 18cm approx Can be stored extended CONDITION:  Grade B - Items with more notic...

Heavy duty nylon baton holder  Molle fastening Various manufactures but mainly UKOM Retracted baton size - 19cm approx CONDITION : Grade A Items ...

Handcuff pouch CS Gas holder Velcro backing CONDITION : Grade B - Items with more noticeable signs of previous use. May include faded patches, sta...

CONDITION: Grade A - Items with light signs of use eg small light stains/marks. Will require a clean.   Pouch for 4 x rubber bullets Velcro flap ...

CONDITION : Grade A - Items with light signs of use eg small light stains/marks. Will require a clean. Genuine equipment Belt loop at the top to se...

Heavy duty woven nylon MOLLE adapter pouch for duty belts Dimensions - 160 x 130mm For fitting to duty belts CONDITION: Grade B - Items with more ...

UK Outdoor Manufacturing heavy duty woven nylon Magazine pouch - double (may fit 3 magazines) Internal dimensions - 130 x 75 x 50mm extends to 210...

Flap retention straps  Pull Tab  Molle Compatible  Manufactures will be Niton or Specialised Canvas CONDITION : New - Brand New Items With Tag or...

CONDITION: Grade B - Items with noticeable signs of previous use which may include small tears, faded patches, stains or other signs of use. Still ...

Genuine Motorola Product, Part Number : PMLN4474B / PMLN4474A Compatible With Motorola MTP700 / MTP750 Black leather case, with Klickfast mount, b...

Genuine Peter Jones ILG Firm Leather Case Designed For All SRP, GPS And SRH Range Open Keypad And LCD Radio Case With Klickfast Docking Clip Inclu...

Make - American Diagnostic Corporation Model - System 5 Multicuff BP System Brand New / Factory Sealed - The entire kit is still fully enclosed i...

Make - American Diagnostic Corporation Model - 3 Cuff Sphygmomanometer System - Large Adult, Adult and Child Gauge/Monitor - Looks brand new and r...

Radio pouch Will fit belts up to 50mm Dimensions - 150 x 50 x 35mm approx CONDITION : Grade B - Items with more noticeable signs of use. May inc...

Green first aid pouch Clear front to see contents Dimensions - 110 x 80 x 40mm approx CONDITION : Grade B - Items with more noticeable signs of...

Torch pouch Klikfast connection Dimensions - 140 x 30 x 15mm approx CONDITION : Grade B - Items with more noticeable signs of use. May include f...

Torch pouch Dimensions - 120 x 30 x 15mm approx Velcro fastening around a 55mm belt / strap CONDITION : Grade B - Items with more noticeable sig...

Utility Pouch Dimensions - 150 x 70 x 20mm approx Velcro fastening CONDITION : Grade A - Items with light signs of use. May have small stains/ma...

Radio Pouch Dimensions - 150 x 60 x 45mm approx Nylon with internal padding Cut out for aerial Popper fastening CONDITION : Grade A - Items with...

Radio Pouch Nylon with internal padding Cut out for aerial Popper fastening Dimensions - 150 x 60 x 45mm approx CONDITION : Grade B - Items with...

Make - Unknown Model - Radio pouch Colour - Black Dimensions - 220 x 70 x 30mm approx Heavy duty woven nylon For Molle vests  CONDITION: Grade A ...

Utility / First aid pouch Size - 160 x 100 x 35mm approx Belt loops CONDITION: Grade A - Items with light signs of use. May include small stains...

Carrier for 6 x grenade or rubber rounds Compartment size - 120 x 35 x 40mm approx Velcro flaps Molle compatible  CONDITION:  Grade A - Items wi...

Utility  / First Aid pouch Size - 120 x 130 x 50mm approx Belt loops Can be fitted onto Molle equipment CONDITION: Grade B - Items with more noti...

Utility  / First Aid pouch Size - 170 x 95 x 30mm approx Belt loops CONDITION: Grade B - Items with more noticeable signs of use. May include fad...

Utility  / First Aid pouch Size - 75 x 130 x 30mm approx Belt loops CONDITION: Grade B - Items with more noticeable signs of use. May include fad...

Niton handcuff holder Straps to fasten around a boot Metal clip to clip over the top of the boot Separate pouch for key and other small bits   CO...

First Aid pouch and roll Suitable to carry foldaway stretchers / inflatable splints etc Large pouch size - 600 x 240mm approx (laid flat) Small po...

Pouch for 3 x small grenades Velcro backing Rear velcro fastening strap Grenades secured with elastic cord Will fit grenades about 40mm diameter (...

The back is hook velcro covered for a strong hold on to a loop velcro panel Handcuffs unit not included   CONDITION:  Grade A - Items with light ...

Suitable for side handled batons, permits carriage in expanded mode Adjustable for left or right handed use 360° with 12 locking positions 50mm be...

Leather torch holder Velcro closure Will fit up to a 2” duty belt Approximate external dimensions;7” CONDITION: New - With tags or in original pa...

Make - Not known Model - 5.56mm Ammo pouch twin Colour - DPM Dimensions - 220 x 150 x 60mm approx.  Heavy Duty Woven Nylon For Molle Vests COND...

Make - Not known Model - Utility pouch  Colour - DPM Dimensions - 200 x 160 x 50mm approx Heavy Duty Woven Nylon For Molle Vests CONDITION:  Gr...

Generic radio pouch  Internal dimensions - 120 x 45 x 35mm approx Belt clip and carrying strap hooks CONDITION:  Used - Grade A - Items with lig...

Leather baton holder  Belt fastening Retracted baton holder size - 17cm approx Can be stored extended CONDITION:  Grade B - Items with more notic...

Specially designed without any sharp edges Pouches with 2 x cable cuffs in each one Pouch that can be fitted to any belt CONDITION:  Grade B - It...

Protec mounted baton holder Suitable for long reach Arnold baton Can be clipped onto horses tack or attached to duty belt CONDITION:  Grade B - I...

Suitable for side handled batons, permits carriage in expanded mode Adjustable for left or right handed use 360° with 12 locking positions 50mm be...

Leather baton holder  Will fit most belts Retracted baton size - 23cm approx CONDITION:  Grade A - Items with light signs of use. May have small...

Baton holder for handled batons like PR24 Suitable for belts up to 1.5" PLEASE NOTE - Belt not included CONDITION:  Grade A - Items with light...

Protec mounted baton holder Suitable for long reach Arnold baton Can be clipped onto horses tack or attached to duty belt CONDITION:  Grade A - I...

Generic pouch can be used for water bottle, radio or ammo magazines Suitable for belts upto 50mm Leg strap (missing buckle) Dimensions - 190 x 70 ...

Make - Various manufactures (designs may vary slightly) Model - Possible for 9mm magazines Colour - Black Dimensions - 110 x 30 x 25mm approx Heav...

Twin 5.56 magazine holder Velcro flap Molle compatible  Ripstop material CONDITION:  Grade B - Items with more noticeable signs of previous use. ...

Manufacture - Generic  Pouch Type - Utility Internal dimensions - 100 x 45 x 25mm approx For Molle Vests CONDITION: Grade B - Items with more noti...